Konova Slider K7-100

PRODUCT HIGHLIGHTS

• - Roller Bearing Sliding System
• - 77.1 lb Load Capacity
• - 39.4" Track Length
• - Tension-Adjustable Ball Bearings
• - Friction-Adjustable Knob
• - 3/8"-16 Tie-Down Screw
• - Detachable Legs with Rubber Ball Feet
• - Ruler for Precise & Repeatable Moves
• - Dual Oil Seals for Cleaning Rails
• - Carrying Bag
• 
  

• Featuring three roller bearings that ride along chrome-plated 8mm rails, the 39.4" long Konova K7 Slider provides smooth, stable, and quiet operation for loads weighing between 6.6 and 61 lb, with a maximum load capacity of 77.1 lb. The slider can be supported using a single tripod or a pair of tripods/stands thanks to 1/4"-20 threads located on the underside of the track, positioned along the center and at either end. Additionally, there are threaded holes on the sides of the slider that enable you to mount it vertically. For ground-level shooting, a pair of height and angle-adjustable legs with rubber ball feet are included that screw into the sides of the slider.

  The slider carriage features a 3/8"-16 screw for attaching a fluid head or ball head, while also offering two 1/4"-20 threaded holes should you want to mount your camera or an accessory on an articulating arm. The resistance of the carriage can be dialed to taste quickly using a red friction adjustment knob, or with more finesse using a wrench to adjust tension. A metric ruler running the length of the slider makes it easy to perform precise and repeatable camera movements. Should you wish to expand the system in the future, you can choose to add an optional crank handle kit or one of the motion controller options.

  
  

  Features

  
  

  - 77.1 lb maximum load capacity (optimal range of 6.6 to 61 lb)

  - Three steel bearings provide smooth, stable, and quiet operation

  - 8mm chrome-plated steel rails

  - Camera carriage with 3/8"-16 screw and two 1/4"-20 threaded holes

  - Friction-adjustment knob

  - Tension is adjustable using included wrench

  - 1/4"-20 and 3/8"-16 mounting threads at center and ends of tripods

  - Mounting threads on side of tripod for vertical mounting

  - Detachable height and angle-adjustable legs with rubber ball feet

  - Metric ruler for repeatable movements

  - 1/4"-20 accessory mounting threads at each end of slider

  - Dual oil seals help keep rails clean from dust and debris

  - Two bubble levels

  - Carrying bag

  - Optional crank handle and motion control upgrade kits