Rode M3 Condenser Microphone
PRODUCT HIGHLIGHTS
·
Heavy duty metal body
·
Internal capsule shock mount
·
High level of RF rejection
·
On-mic selectable high pass filter @ 80Hz-12dB/Oct (-10 and -20dB PAD)
·
Heat-treated high-strength mesh head
·
Battery status indicator
·
9V Battery Power, 24 or 48V Phantom Power
·
Includes wind shield, mic clip and zip pouch
The RØDE M3 is a highly versatile end-address condenser microphone,
designed to be completely at home in the studio, on stage or on location. It is
equally suitable as an instrument microphone for guitars, drums and percussion
or even vocals.
Featuring a heavy duty metal body and internally shock mounted 1/2"
condenser capsule mounted for end-address, the M3 can be powered either via P48
phantom power, or an internal 9V battery.
A -10dB and -20dB level attenuator (pad), selectable from inside the
battery compartment, allows recording of loud sound sources, such as a guitar
amplifier or snare drum. A high-pass filter selectable on the microphone power
switch introduces a filter at 80Hz to reduce low frequency sounds and handling
noise.
The RØDE M3 microphone is designed and made in Australia, and covered by
RØDE Microphones' industry leading 10 year warranty.
M3 Specifications
Acoustic Principle |
Pressure
Gradient |
Active Electronics |
JFET
impedance converter with bipolar output buffer |
Capsule |
0.50" |
Address Type |
End |
Frequency Range |
40Hz -
20kHz(selected HPF @80Hz) |
Output Impedance |
200Ω |
Maximum SPL |
142dB SPL
(@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level |
9.2mV |
Sensitivity |
-40.0dB re
1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) |
21dB-A |
Weight |
390.00gm |
Dimensions |
225.00mmH
x 33.00mmW x 33.00mmD |
Warranty |
1 year
with free extension to 10 years following registration here |
Technical | |
Warranty | 1 Year Service & Spareparts |