Neutrik NC3FXS Female XLR Connector with On-Off Switch Nickel Housing
The Neutrik NC3FXS 3-Pole XLR Female Cable Connector with Nickel Housing is designed to be used with microphones without a switch. It features a built-in noiseless on / off switch with short-circuiting contacts (2 and 3).
- Built-in noiseless on / off switch
short-circuiting contacts (2 and 3)
- For use with a switchless microphone
- Rugged zinc die-cast shell, long
lasting, and durable
- Chuck-type strain relief system for secure clamping of cables
- Rugged metal boot with a rubber gland gives high protection against bending stresses
Connection Type |
XLR female |
Capacitance |
Between Contacts: ≤4 pF |
Contact Resistance |
≤3 mΩ (inner) |
Dielectric Strength |
1.5 kVDC |
Insulation Resistance |
>2 GΩ (initial) |
Rated Current Per Contact |
16 A |
Rated Voltage |
50 V |
Cable O.D. |
0.14 to 0.28" (3.5 to 7 mm) |
Insertion Force |
≤20 N |
Withdrawal Force |
≤20 N |
Lifetime |
>1,000 mating cycles |
Wire Size |
2.5 mm2, 14 AWG, maximum |
Wiring |
Solder contacts |
Locking Device |
Latch lock |
Boot |
Polyurethane |
Contact Plating |
0.2 µm Au hard alloy over 2 µm Ni |
Contacts |
Bronze (CuSn6) |
Insert |
Polyamide (PA 6.6 30% GR) |
Locking Element |
St3K32 (latch) |
Shell |
Zinc die-cast (ZnAl4Cu1) |
Shell Plating |
Nickel |
Strain Relief |
Polyacetal (POM) |
Flammability |
UL 94 HB |
Standard Compliance |
IEC 61076-2-103 |
Protection Class |
IP40 |
Solderability |
Complies with IEC 68-2-20 |
Temperature Range |
-22 to 176°F (-30 to 80°C) |
Dimensions |
Length: 3.46 to 3.54" (88 to 90 mm) |
Technical | |
Warranty | Non Warranty |