Libec ALX S8 Slider (83cm)
PRODUCT HIGHLIGHTS
·
Roller
Bearing Sliding System
·
33 lb
Load Capacity on Flat Surfaces
·
28"
Travel Distance
·
32.6"
Total Track Length
·
75mm Ball
Base with 1/4" & 3/8" Threads
·
Spring-Loaded
Friction Adjustment Knob
·
Folding
Legs with Height-Adjustable Feet
·
Interchangeable
Rail Lengths
·
3/8"-16
Tie-Down Screw
·
Padded
Carrying Case
Descriptions
The Libec
ALX S8 is a 32.6" long camera slider that features an
integrated 75mm ball base with a flat bottom, allowing it to be mounted directly
to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or
flat surface using, the slider has a maximum load capacity of 33 lb. For smooth
and wobble-free operation, the carriage features eight roller bearings
positioned on the rail top and along the sides at angles. A spring-loaded
friction knob allows you to adjust slide tension, while a brake knob will lock
the carriage in place at any point on the rails. Using a supplied hexagon
wrench, you can adjust the pushing force that the ball bearing exerts on the
rail.
At each
end of the slider, there are 1/4"-20 and 3/8"-16 threads and a
rosette for attaching various accessories. If you will be using the slider on
the ground or tabletop, the slider features built-in legs with height-adjustable
feet to accommodate non-level terrain. For compact storage, the legs fold up
against the side of the slider, securing in place using thumb knobs. Unscrewing
the knobs completely allows you to detach the legs completely and swap out the
32.6" rail for separately available 15.5" or 47" rail lengths.
Key Features
·
28"
slide range with a 33 lb payload
·
33 lb
load capacity when used on a tabletop or flat surface
·
Dual-base
tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base
or 75mm ball head
·
Eight
high-performance ball bearings on the top and sides allow for smooth,
wobble-free motion
·
Tension/friction
knob, brake knob, and bubble level
·
32.6"
rail can be swapped for optional 15.5" or 47" rail lengths
·
Collapsible
tabletop legs for easy setup and storage
·
Height-adjustable
feet
·
Includes
padded carrying case with fixing handle and maintenance kit
Specifications
Sliding Range 28"
(71.1 cm)
Payload 33
lb (15 kg) (when not mounted on a tripod)
Head Attachment 3/8"-16
screw
Tripod Mount Types 75
mm ball base
1/4"-20
and 3/8"-16 threaded holes on bottom of 75 mm ball base
1/4"-20
and 3/8"-16 threads along the bottom for mounting on two tripods
Accessory Mounting 1/4"-20
and 3/8"-16 threaded holes (at each end of tripod)
Rosettes (one
at each end of tripod)
MaterialAluminum alloy
and engineering plastic
Length 32.6"
(83 cm)
Weight 4
lb (1.8 kg) (excluding tripod mount adapter and bowl tie-down)
Technical | |
Warranty | Non Warranty |