Libec ALX S4 Slider (40cm)
PRODUCT HIGHLIGHTS
·
Roller
Bearing Sliding System
·
33
lb Load Capacity on Flat Surfaces
·
12"
Travel Distance
·
15.5"
Total Track Length
·
75mm
Ball Base with 1/4" & 3/8" Threads
·
Spring-Loaded
Friction Adjustment Knob
·
Folding
Legs with Height-Adjustable Feet
·
Interchangeable
Rail Lengths
·
3/8"-16
Tie-Down Screw
·
Padded
Carrying Case
Descriptions
The Libec ALX S4 is a
15.5" long camera slider that features an integrated 75mm ball base with a
flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as
well as flat-base heads. When used on tabletop or flat surface using, the
slider has a maximum load capacity of 33 lb. For smooth and wobble-free
operation, the carriage features eight roller bearings positioned on the rail
top and along the sides at angles. A spring-loaded friction knob allows you to
adjust slide tension, while a brake knob will lock the carriage in place at any
point on the rails. Using a supplied hexagon wrench, you can adjust the pushing
force that the ball bearing exerts on the rail.
At
each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a
rosette for attaching various accessories. If you will be using the slider on
the ground or tabletop, the slider features built-in legs with
height-adjustable feet to accommodate non-level terrain. For compact storage,
the legs fold up against the side of the slider, securing in place using thumb
knobs. Unscrewing the knobs completely allows you to detach the legs completely
and swap out the 15.5" rail for separately available 32.6" or
47" rail lengths.
Key
Features
·
12"
slide range with a 33 lb payload
·
33
lb load capacity when used on a tabletop or flat surface
·
Dual-base
tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base
or 75mm ball head
·
Eight
high-performance ball bearings on the top and sides allow for smooth,
wobble-free motion
·
Tension/friction
knob, brake knob, and bubble level
·
15.5"
rail can be swapped for optional 32.6" or 47" rail lengths
·
Collapsible
tabletop legs for easy setup and storage
·
Height-adjustable
feet
·
Includes
padded carrying case with fixing handle and maintenance kit
Specifications
Sliding Range 12"
(30.5 cm)
Payload 33
lb (15 kg) (when not mounted on a tripod)
Head Attachment 3/8"-16
screw
Tripod Mount Types 75
mm ball base
1/4"-20
and 3/8"-16 threaded holes on bottom of 75 mm ball base
Accessory Mounting 1/4"-20 and
3/8"-16 threaded holes (at each end of tripod)
Rosettes (one
at each end of tripod)
Material Aluminum
alloy and engineering plastic
Length 15.5"
(40 cm)
Weight 3.1
lb (1.4 kg) (excluding tripod mount adapter and bowl tie-down)
Technical | |
Warranty | Non Warranty |