DJI Matrice 600 Pro Hexacopter
PRODUCT HIGHLIGHTS
· Without Gimbal
·
Works with Zenmuse Gimbals / Cameras
·
Works with Ronin-MX Gimbal
·
Up to 34 Pound Total Take-Off Weight
·
Integrated Lightbridge 2 Support
·
Full HD 1080p Live Monitoring
·
A3 Pro Flight Controller
·
Controllable with DJI Go App
·
Increased Performance / Modular Design
·
Collapsible Design for Easy Transport
·
Six Flight Batteries and Six-Bay Charger
Supporting a total takeoff weight
of 34 pounds, the Matrice 600 Pro (M600 Pro) is
a hexacopter from DJI designed for professional
video and industrial imaging applications. Updated from the original Matrice
600, it features improved flight performance and a higher loading capacity.
Pre-installed arms and antennas reduce time required for setup, and the
system's modular design makes it easy to mount additional modules.
The Matrice 600 Pro centers around DJI's
advanced A3 Pro flight control controller with triple redundancy. It
incorporates the Lightbridge 2 system for HD resolution, low-latency monitoring
via SDI, HDMI, and USB outputs on the controller. For camera support, the
Matrice 600 works with Zenmuse Z15 series gimbals, the Ronin-MX gimbal, and
Zenmuse X Series gimbal/camera hybrids.
This version of Matrice 600 Pro comes
almost-ready-to-fly (ATF) and includes a controller (transmitter), flight
batteries, six-bay charger, flight controller, and sundries. It also features a
durable, customizable case that absorbs impact from shakes or falls, providing
all-round protection for your hexacopter when carried or transported.
Additional hardware needed may include a gimbal, camera, as well as any flight
controller add-ons. Some assembly is required.
Performance
Intelligent Drive System
The Matrice 600 Pro uses
sine-wave-driven, intelligent ESCs to ensure it performs accurately, safely,
and efficiently, while the A3 Pro flight controller's self-adaptive systems
adjust flight parameters automatically based on different payloads.
Air System
Design
Updated from the Matrice 600, the
Matrice 600 Pro is designed to be simple to set up and ready to fly in a matter
of minutes. Its airframe has been optimized for easier transportation with a
quick release landing gear design and folding frame arms. Under the new upper
cover, the positions of GNSS modules and sensors have been revamped, and a new
dampening system for the IMU units increases reliability during flight.
Modular Design
The modular design makes the Matrice 600
Pro easy to set up and ready to use.
Gimbal Compatibility
All Zenmuse cameras and gimbals are
natively compatible, and a maximum payload of 13.2 lb allows it to fly the
Ronin-MX gimbal and a range of cameras, from Micro Four Thirds systems to the
RED EPIC.
Built to Last
A dust-proof propulsion system
simplifies maintenance, while actively cooled motors make for reliable
operation for extended periods of time.
A3 Pro Flight
Controller
The A3 Pro system is optimized for
professional and cinematography applications, providing navigation and
stabilization to the aircraft. The system features GNSS, which means it can use
satellite systems, such as GPS or GLONASS, in combination with a compass to
provide precise positional data. The A3 Pro can be used in combination with
DJI's Lightbridge 2 system to provide a high-quality video downlink from a
gimbal-mounted camera. Ground station software enables features, such as
telemetry monitoring and route planning, and provides a flight simulator.
The system features three IMUs and three GNSS units, with additional analytical
redundancies for a total of six redundancies. Working together with advanced
diagnostic algorithms, if the A3 Pro detects GNSS or IMU unit failure during
flight, it seamlessly switches to another unit to maintain reliability and
precision.
DJI GO App for iOS and Android
The Matrice 600 Pro supports the DJI GO
app as well as the DJI Assistant 2. Get a live HD view, battery status,
redundancy status, transmission strength, and much more straight from the DJI
GO app. DJI GO is also the control center for the camera, giving access to
shutter speed, ISO, and photo or video capture on any Zenmuse X Series camera
as well as remote focus and aperture on the Zenmuse X5 and X5R cameras. The DJI
Assistant 2 supports firmware updates and the new Ground Station, and comes with
a built-in flight simulator.
Extended Range
The Matrice 600 Pro's radio range
extents to 3.1 miles with a clean signal.
D-RTK GNSS Upgrade
The A3 GNSS system can be upgraded with
separately available Real-Time Kinematic technology (RTK) for even greater
navigational accuracy. Using dual antennas, RTK provides greater precision than
a compass and is not susceptible to magnetic interference from metal
structures.
Lightbridge 2
Professional HD Transmission
DJI Lightbridge 2 has been designed from
the ground up to meet the requirements of professional broadcasting, offering
high frame rates and HD live streaming. USB, mini-HDMI, and 3G-SDI ports on the
controller support video output at up to 1080p/60 fps or a broadcast standard
output of 720p/59.94 fps and 1080i/50 fps.
DJI SDK
The Matrice 600 Pro's is fully
compatible with the DJI Onboard SDK and Mobile SDK to meet the requirements of
those building software for industrial applications. It has a dual parallel CAN
and API ports for connecting DJI devices, including the Guidance sensor system,
the RTK GNSS units, or third party components of your choice.
Batteries and
Power
Intelligent Battery System
The battery management system monitors
every battery during flight, ensuring safe landing in the event of single
battery failure. Compared to traditional non-intelligent batteries, the Matrice
600 Pro's battery management system simplifies maintenance while enhancing
security.
6-Bay Charger
The Matrice 600 Pro charger has six
charging hubs, enabling it to charge six Intelligent Batteries simultaneously.
It charges a TB47S battery in about 92 minutes and a TB48S battery in about 110
minutes.
Technical | |
Warranty | Non Warranty |