Saramonic UWMIC10 (RX10 Only) UHF Wireless Lavalier
The system's RX10 camera-mountable receiver features a wide-switching RF bandwidth and an easy-to-read LCD display. It is built with infrared synchronization between transmitter and receiver, an auto-scan function, and can search for an available transmission frequency. The headphone jack provides real-time monitoring with headphones, which is useful for cameras that lack a monitor output.
The two compact transmitters employ a crystal-controlled PLL synthesizer and are equipped with a muting function. Their RF power output can be switched between high, middle, and low settings. In addition, each transmitter is built with a 1/8" type mic input. Also, included with this system are two lavalier microphones, a shoe-mount adapter, a single 1/8" to XLR output cable, and a single 1/8 to 1/8" output cable.
Saramonic RX10 Specs
| Receiver | |
|---|---|
| Channels | Dual Channel Available |
| Frequencies | 96, A & B group |
| Oscillator Type | PLL synthesizer |
| Audio Output Connector | 1/8" (3.5 mm) jack |
| Antenna | 1/4 wave wired |
| Audio Output Level | -60 dBV |
| Headphone Output Level | 30 mW (16 Ohms) |
| Receiving Frequency | 614 to 696 MHz |
| Receiving Sensitivity | -95 dBm |
| Signal to Noise Ratio | 70 dB or more |
| Voice Delay | 12 ms |
| Reference Deviation | ±5 kHz (-60 dBV, 1 kHz input) |
| Frequency Response | 40 Hz to 18 kHz (±3 dB) |
| Distortion | 0.5% or less |
| Spurious and Harmonic Suppression | -60 dB |
| Batteries | Two AA size batteries |
| Dimensions | 6.7 x 2.5 x 1.2" (17 × 6.4 × 3.0 cm) |
| Weight | Approx. 7.72 oz (219 g) excluding batteries |
| Technical | |
| Warranty | - |



